dedication

THIS BLOG IS DEDICATED TO THE PREVSERVATION AND RESTORATION OF BRITISH AUTOMOBILES

Wednesday, April 13, 2016

BODYWORK CONTINUES...ALIGNING THE BONNET

Fitting the body panels on the Triumph has required numerous hours.  The awkward fit is mostly due to several minor collisions that have taken place over the years.  However, Triumph cars in general were born with these issues.  We are realigning and adjusting each panel in an attempt to improve the fit.









In the photo above you will notice the exaggerated gap between the bonnet and the fender.  Much of this is the result of minor damage to the edge of the bonnet.  Our body repair experts, Paxton and Carl are realigning the damaged area.











The preliminary cuts and welds have been made and the bonnet and fender are now in alignment.
Very little filler will be required.














Tom McCurry
Tommy's Topless Cars
843-338-2253








Tuesday, April 5, 2016

BODYWORK CONTINUES...INITIAL REASSEMBLY

In order to complete the bodywork, the body parts must be reassembled so that the margins between the panels can be adjusted.














In the photo to the right you will notice a wider margin between the fender and bonnet.  A metal strip will be fixed to the edge of the bonnet thus narrowing the margin.  













There are also a few issues with  the elevation of the panels.  As you can see in the photo to the left, the edge of the bonnet is a bit higher than the edge of the fender.  The other fender has similar problems.  The goal is to adjust all the panels so that the margins between them are the same width.  









Tom McCurry
Tommy's Topless Cars
843-448-2253


























Monday, April 4, 2016

BODYWORK CONTINUES...REPAIRING FRONT FENDERS

Some minor rust and collision damage was discovered in the front fenders.  I suppose one would expect that at some point.  After all, this TR3 is 56 years old.  Shown in the photo to the right is the section of the right front fender that was removed.  The rust and collision damage had been repaired with layers of fiberglass and new metal.








A new patch panel was fabricated and fastened in place.
















After the repairs were completed, the inside of the fender was coated with a rubberized undercoating.  The fenders are now ready for a "trial" reassembly.













Tom McCurry
Tommy's Topless Cars
843-338-2253
















Tuesday, March 29, 2016

BODYWORK CONTINUES...ENGINE COMPARTMENT IN PRIMER

After cleaning and "scuffing" the engine bay we are ready to apply the epoxy primer.  Scuffing has revealed the need for a bit of bodywork.  














Several minor dents have been straightened and the paint removed from the damaged areas.















In the photo to the left you will see the application of the first coat of epoxy primer.  The a very thin coat of filler will be applied as necessary to produce a smooth surface.













Stay tuned...
Tom McCurry
Tommy's Topless Cars
843-338-2253







Wednesday, March 16, 2016

BODYWORK CONTINUES...PREPARING ENGINE COMPARTMENT

After degreasing the engine bay, Jeremy and I began the task of preparing the sheet metal surfaces for primer.  Pressure washing had revealed areas where the existing paint had cracked.  These areas must be repaired.











The engine compartment must be sanded and cleaned again with grease and wax remover prior to the application of the epoxy primer.













Tom McCurry
Tommy's Topless Cars
843-338-2253

Tuesday, March 15, 2016

CLEANING THE ENGINE COMPARTMENT

It has probably been 56 years since the "Shuttle" has been cleaned under the bonnet, or at least it appears so.  















We placed the TR on jack stands and removed the front wheels exposing the front suspension.  Pictured to the left is Jeremy pressure washing the engine compartment and suspension.













The result is a much cleaner work area.  The bodywork on the inner fenders will now begin.  
The inner fenders and firewall will be painted gloss black to match the car's exterior.












 After the necessary repairs are made to the suspension and steering, these parts will be sprayed with rubberized undercoating.
The rubber brake line hoses, pictured to the right, will be replaced.















Stay tuned...
Tom McCurry
Tommy's Topless Cars
tdmccurry@yahoo.com
843-338-2253















Monday, March 14, 2016

BODYWORK CONTINUES...DOORS IN PRIMER

Now that the doors have been properly aligned, our attention turns to repairing the blemishes in the sheetmetal.  The body will be painted black and must be perfectly straight.












As you recall, there were issues with the fit between the doors and latch side of the door frames on both sides.  The fit has been adjusted and several coats of epoxy primer has been applied.  











Progressing nicely...
Tom McCurry
Tommy's Topless Cars
843-338-2253