In order to complete the bodywork, the body parts must be reassembled so that the margins between the panels can be adjusted.
In the photo to the right you will notice a wider margin between the fender and bonnet. A metal strip will be fixed to the edge of the bonnet thus narrowing the margin.
There are also a few issues with the elevation of the panels. As you can see in the photo to the left, the edge of the bonnet is a bit higher than the edge of the fender. The other fender has similar problems. The goal is to adjust all the panels so that the margins between them are the same width.
Tom McCurry
Tommy's Topless Cars
843-448-2253
No comments:
Post a Comment